 | | |
| Open |
Mobilgrease GC 40
(Grease)
| |
Mobilgrease GC 40 is a non-solvent containing grease for the lubrication of
open gears and bearings. |
|
Mobiltac LL, MM, QQ
(Oil)
| |
The Mobiltac Double Letter Series products are high performance, non-diluent
type, heavy-bodied products intended for the lubrication of open gears over a
wide range of environmental conditions and machine requirements. |
|
The Synthetic Alternative
ExxonMobil's innovative synthetics are not limited to the conventional lower viscosity grades required for parallel, right angle, or even worm gears, but are available in the ultra-high viscosity grades needed for more heavily loaded and slower open gears. These higher viscosity Mobil synthetics provide the same enhanced performance characteristics as their lower viscosity cousins, including exceptional oxidation resistance, thermal stability, and the ability to maintain their viscosity over wider temperature ranges than mineral oils. Additionally, our innovative synthetics can actually reduce the friction and heat generated during gear teeth mesh sliding and rolling. When it comes to achieving peak performance and cost savings, the benefits of Mobil synthetic lubricants are clear:
- Low temperature fluidity
- Better gear protection
- Longer oil life
- Reduced energy consumption
Synthetics are conventionally reserved for equipment subjected to extreme high or low temperatures, frequent high loading and extended service intervals to avoid both equipment and oil degradation.
|
Mobilgear SHC 22M, 46M
(Synthetic, Oil)
| |
Mobilgear SHC 22M and 46M are supreme performance ultra high viscosity
synthetic lubricants designed specifically for use in heavily loaded, low
speed gears where boundary lubrication conditions often prevail.
Mobilgear SHC 22M and 46M exceed Falk Corporation's minimum viscosity
requirements for intermittent lubrication of gears - winter and summer grades,
respectively. |
|
| | |
| Parallel |
Mobil DTE FM Series
(Oil, Food Grade)
| |
Mobil DTE FM Series oils are high performance lubricants designed to satisfy a
wide range of multi-use equipment requirements for the food processing and
packaging industry.
The Mobil DTE FM Series oils have high ratings in the FZG Gear Test
demonstrating their excellent protection against wear and scuffing. |
|
Mobil DTE Oil Double Letter Series
(Oil)
| |
The Mobil DTE Oil Double Letter Series of lubricants are high performance
heavy duty circulating oils primarily intended for continuous reuse in
circulation lubrication systems for gears and bearings.
The Mobil DTE Double Letter Series family of products provides a versatile
lubricant source for a wide range of industrial equipment.
This combination of benefits has Mobil DTE Oil Double Letter Series the
product of choice for many users around the world, for the last several
decades. |
|
Mobil DTE PM Series
(Oil)
| |
Mobil DTE PM Series products are high-quality, high-performance lubricants
specifically designed for demanding industrial paper machine circulating
systems. |
|
Mobilgear 600 Series
(Oil)
| |
The Mobilgear 600 Series are extra high performance gear oils having
outstanding extreme pressure characteristics and load-carrying properties,
intended for use in all types of enclosed gear drives with circulation or
splash lubrication systems.
Mobilgear 600 Series oils are recommended for industrial spur, helical and
bevel enclosed gears with circulation or splash lubrication, operating at bulk
oil temperatures up to 100ºC.
Mobilgear 600 Series gear oils are used in a very wide variety of applications
in virtually all industrial sectors as well as in marine units. |
|
Mobiltrans HD Series
(Oil)
| | Mobiltrans HD 10W, 30, 50, and 60 are extra high performance transmission and drive-train lubricants engineered to meet the rigorous specifications required by Caterpillar TO-4.
This technology combines selected base oils and an advanced additive system to deliver the precise performance parameters needed to maximize the productivity of construction, quarrying, and mining equipment operating in severe conditions. |
|
Mobilube HD LS 80W-90
(Oil)
| | Mobilube HD LS 80W-90 is an extra high performance, automotive lubricant formulated from select base oils and an advanced additive system specifically for limited-slip differentials. |
|
Mobilube XFD 50 60
(Oil)
| |
Mobilube XFD 50 and 60 are extra high performance drivetrain lubricants
engineered specifically to provide optimum component life when used as
recommended in Caterpillar final drives and axles. |
|
Mobil Vacuoline 500 Series
(Oil)
| | The Mobil Vacuoline 500 Series family of products provides a versatile lubricant source for a wide range of industrial equipment.They are formulated from high quality base stocks and a proprietary additive system to provide superior wettability, extra oil retention and thin film protection against rust and corrosion. |
|
The Synthetic Alternative
For more than 25 years, manufacturers have successfully used Mobil synthetic lubricants in parallel and right angle gears, especially where applications are subjected to extreme high or low temperatures. Mobil synthetics are oxidation resistant, more thermally stable, and able to maintain viscosity over wider temperature ranges than mineral oils. Additionally, our innovative synthetics can actually reduce the friction and heat generated during gear teeth mesh sliding and rolling. When it comes to achieving peak performance and cost savings, the benefits of Mobil synthetic lubricants are clear:
- Better gear protection
- Longer oil life
- Low temperature fluidity
- Less power consumption
Synthetics are conventionally reserved for equipment subjected to extreme high or low temperatures, frequent high loading and extended service intervals to avoid both equipment and oil degradation.
|
Mobilgear SHC XMP Series
(Synthetic, Oil)
| |
Mobilgear SHC XMP Series supreme performance, fully synthetic industrial gear
oils designed to provide optimum equipment protection and oil life even under
extreme conditions.
Mobilgear SHC XMP lubricants are recommended for enclosed industrial gear
drives including steel-on-steel spur, helical, and bevel gears.
Because of their unique mix of properties, including resistance to
micropitting wear, and their performance in tough applications and wide
temperature range, Mobilgear SHC XMP Series products enjoy a growing
reputation among customers and OEMs around the world. |
|
Mobilith SHC 100, 220, 460, 007, 1500
(Synthetic, Grease)
| | Mobilith SHC Series greases are supreme performance products designed for a wide variety of applications at extremes of temperature.Mobilith SHC Series greases have become the products of choice for many users, in many industries worldwide. |
|
Mobil SHC 600 Series
(Synthetic, Oil)
| | Mobil SHC 600 Series lubricants are supreme performance gear and bearing oils designed to provide outstanding service in terms of equipment protection, oil life and problem-free operation enabling increased customer productivity.The Mobil SHC 600 Series products have low traction coefficients, which derive from the molecular structure of the base stocks used. The leading edge technology on which Mobil SHC 600 Series lubricants have always been based has made these the products of choice for operators of a wide range of equipment, worldwide. |
|
Mobil SHC PM Series
(Synthetic, Oil)
| |
Mobil SHC PM Series products are supreme performance synthetic lubricants
specifically designed for the most demanding industrial paper machine
circulating systems. |
|
Mobiltrans AST
(Synthetic, Oil)
| |
Mobiltrans AST (All Season Transmission) is an extra high performance
drivetrain lubricant engineered to meet Caterpillar's new TO-4 performance
specifications for off-highway transmissions, drive trains, and hydraulic
systems. |
|
Mobiltrans SHC 50
(Synthetic, Oil)
| |
DISCONTINUED - The recommended replacement is Mobil Delvac Synthetic
Transmission Fluid 50. |
|
Mobiltrans SHC Arctic
(Synthetic, Oil)
| |
DISCONTINUED - The recommended replacement is Mobil Delvac Synthetic
Transmission Fluid Arctic. |
|
Mobilube SHC 75W-90, 80W-140
(Synthetic, Oil)
| |
DISCONTINUED - The recommended replacement product is Mobil Delvac Synthetic
Gear Oil 75W-90, 80W-140. |
|
| | |
| Worm |
Mobil Cylinder Oils
(Oil)
| |
Mobil Cylinder oils are extra high performance high viscosity oils designed
for use in enclosed worm gears operating at moderate to high speeds and
temperatures, and where heavy loads, slow speeds or high temperatures demand
high viscosity oils. |
|
Mobil DTE FM Series
(Oil, Food Grade)
| |
Mobil DTE FM Series oils are high performance lubricants designed to satisfy a
wide range of multi-use equipment requirements for the food processing and
packaging industry.
The Mobil DTE FM Series oils have high ratings in the FZG Gear Test
demonstrating their excellent protection against wear and scuffing. |
|
The Synthetic Alternative
Manufacturers have successfully used Mobil synthetic lubricants in worm gears, including filled-for-life units, for more than 25 years. Our innovative synthetics significantly boost the efficiency of worm gears, especially at high reduction ratios by reducing the friction and heat generated during gear teeth mesh sliding.
The low frictional characteristic of Mobil synthetics can actually improve efficiency up to 10% compared to mineral oils. Additionally, Mobil synthetics are oxidation resistant, are more thermally stable, and maintain their viscosity over wider temperature ranges than mineral oils. When it comes to achieving peak performance and cost savings, the benefits of Mobil synthetic lubricants are clear:
- Reduced energy consumption
- Improved oil life
- Enhanced wear protection
Synthetics are conventionally reserved for equipment subjected to extreme high or low temperatures, frequent high loading and extended service intervals to avoid both equipment and oil degradation.
|
Mobil Glygoyle HE Series
(Synthetic, Oil)
| |
Discontinued - The replacement product is Mobil Glygoyle Series.
Mobil Glygoyle HE Series is a family of high performance, highly efficient,
fully synthetic, polyalkylene glycol (PAG) worm gear lubricants developed for
use under operating conditions beyond the capabilities of other synthetic
lubricants and mineral oils.
The Mobil Glygoyle HE Series is primarily designed for the lubrication of worm
gears, especially for heavy-duty, severe service applications.
Mobil Glygoyle HE Series products have gained the support of key OEMs and are
the products of choice for many equipment operators, worldwide. |
|
Mobilith SHC 100, 220, 460, 007, 1500
(Synthetic, Grease)
| | Mobilith SHC Series greases are supreme performance products designed for a wide variety of applications at extremes of temperature.Mobilith SHC Series greases have become the products of choice for many users, in many industries worldwide. |
|
Mobil SHC 600 Series
(Synthetic, Oil)
| | Mobil SHC 600 Series lubricants are supreme performance gear and bearing oils designed to provide outstanding service in terms of equipment protection, oil life and problem-free operation enabling increased customer productivity.The Mobil SHC 600 Series products have low traction coefficients, which derive from the molecular structure of the base stocks used. The leading edge technology on which Mobil SHC 600 Series lubricants have always been based has made these the products of choice for operators of a wide range of equipment, worldwide. |
|
Mobil SHC PM Series
(Synthetic, Oil)
| |
Mobil SHC PM Series products are supreme performance synthetic lubricants
specifically designed for the most demanding industrial paper machine
circulating systems. |
|
Products & Services
